A Wet Scrubber is an air pollution control device which uses a liquid to remove contaminants from a gas stream.
The removal process is achieved by bringing the gas stream into contact with the scrubbing liquid, which facilitates mass transfer of the contaminants into the liquid. When the water is recirculated, addition of fresh water is necessary to purge contaminants and replace evaporation losses. Fresh water may be added to the recycle continuously or periodically.
Tri-Mer has a variety of high-efficiency wet scrubbers for the removal of inorganic gases, odors, fumes, acid fumes, sulfuric acid, chrome, NOx, fine particulate, fine dusts from industrial gas streams, mercury, HCl, Cl2, SO2, and HF.
Applications include a broad range of manufacturing and process industries; semiconductor, metal finishing, and chemical industries generating corrosive fumes and gases.
5 Scrubber design factors are influenced by the type of pollutant being removed: |
||
---|---|---|
1 | Packed Bed Height: relates to the required contact time between the pollutant-laden gas stream and the scrubbing liquid to achieve mass transfer. The packed bed height is sized according to the type of pollutant and efficiency requirements. |
|
2 | Scrubbing Liquid Type: When scrubbing acidic pollutants, a caustic (e.g. NaOH) may be added to the scrubbing liquid to aid in acid absorption. Likewise, an acid (e.g. H2SO4) may be added to the scrubbing liquid if the pollutant is caustic. |
|
3 | Liquid Flow Rate: The flooding factor of the packed bed. |
|
4 | Target Gas Velocity: 250 to 450 fpm through a scrubber vessel. Design velocity differs based on the pollutant. |
|
5 | Materials of Construction: Chemical compatibility, also cost, are two considerations. |
Scrubber body | ||
Outlet from the scrubber | ||
Mist eliminator | ||
Mist eliminator access door | ||
Recirculation liquid distribution nozzle system | ||
Recirculation piping system | ||
Recirculation pumps: single or redundant, as shown | ||
(Optional) recirculation system basket strainer for prevention of pump damage and nozzle plugging | ||
Liquid flow meter | ||
Packing media: Tri-Packs | ||
Packing support grid | ||
Scrubber inlet (round or rectangular) | ||
Recirculation tank | ||
Recirculation sump level control system | ||
Packing removal portal | ||
Packing fill door |
Tri-Mer wet scrubbers have numerous modules, including packed towers, mist eliminators, ducting and exhaust stacks, all of which are manufactured on Tri-Mer’s Michigan campus.